跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的3本指南

英语
中文

正翻译步骤 1

步骤 1
Insert the tip of a small flathead screwdriver between the X clamp and its retaining post on the heat sink.
  • Insert the tip of a small flathead screwdriver between the X clamp and its retaining post on the heat sink.

  • Pry the X clamp away from its retaining post until it is lifted above the small groove cut into the retaining post.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可