跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 7

步骤 7
With a set of tweezers, flip the front end of the button bracket up to allow access to the rest of the button ribbon cable. Do not remove the bracket entirely—it is still attached to the ribbon cable. Be very careful while moving the bracket, or you may tear the fine offshoots of the ribbon cable. During reassembly, be sure the lock/mute switch fits properly into the notch in the lock/mute button.
  • With a set of tweezers, flip the front end of the button bracket up to allow access to the rest of the button ribbon cable.

  • Do not remove the bracket entirely—it is still attached to the ribbon cable. Be very careful while moving the bracket, or you may tear the fine offshoots of the ribbon cable.

  • During reassembly, be sure the lock/mute switch fits properly into the notch in the lock/mute button.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可