跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
荷兰语

正翻译步骤 3

步骤 3
Use the flat end of a spudger to lift the rear-facing camera connector up off of its socket on the logic board. Gently push the rear-facing camera cable to the left, away from the logic board. Gently push the rear-facing camera cable to the left, away from the logic board.
  • Use the flat end of a spudger to lift the rear-facing camera connector up off of its socket on the logic board.

  • Gently push the rear-facing camera cable to the left, away from the logic board.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可