跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的10指南

英语
中文

正翻译步骤 2

步骤 2
Lift the back cover to release the rest of the plastic clips and remove it. In case you can't lift the back cover completely, slide your fingernail or your prying tool around the midframe to release the remaining clips.
  • Lift the back cover to release the rest of the plastic clips and remove it.

  • In case you can't lift the back cover completely, slide your fingernail or your prying tool around the midframe to release the remaining clips.

  • To reinstall the back cover, press it firmly into place until you hear a snap from the plastic clips to form a seamless connection with the rear side of the phone.

从左下角的缺口处开始打开后盖。

在缺口处 插入一个塑料打开工具,将其向另一角移动,直到后壳弹开。

-[* red] Start by lifting the back panel using the gap located on the bottom-left side of the phone.
-[* black] Insert the plastic opening tool into the gap and move it along the edge of the phone until the rear case pops off.
+[* black] Lift the back cover to release the rest of the plastic clips and remove it.
+ [* icon_note] In case you can't lift the back cover completely, slide your fingernail or your prying tool around the midframe to release the remaining clips.
+[* icon_reminder] To reinstall the back cover, press it firmly into place until you hear a snap from the plastic clips to form a seamless connection with the rear side of the phone.

在开源创作共享许可协议下,你的投稿已被许可