跳转到主内容

修复你的物品

维修的权力

配件 & 工具

英语
中文

正翻译步骤 14

步骤 14
Sadly, the Streak's LCD is permanently adhered to the front panel glass. However, that LCD/glass subassembly is held in the front panel with very strong 3M adhesive, and could be removed with enough careful prying. The LCD is bonded to the front panel glass to increase the strength of the device and sensitivity of the capacitive touch panel.
  • Sadly, the Streak's LCD is permanently adhered to the front panel glass. However, that LCD/glass subassembly is held in the front panel with very strong 3M adhesive, and could be removed with enough careful prying.

  • The LCD is bonded to the front panel glass to increase the strength of the device and sensitivity of the capacitive touch panel.

  • The inner face of the front panel assembly isn't all that exciting. The ear speaker and vibrator motor can be seen near its top edge.

  • The touchscreen ribbon cable houses:

  • Pixcir's controversial Tango S32 Touchscreen controller

  • Atmel's ATmega168P 8-bit AVR microcontroller

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可