修复你的物品

维修的权力

配件 & 工具

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 6

步骤 6
Prepare an iOpener and lay it over the lower edge of the digitizer to loosen the adhesive holding the home button gasket in place. Wait about two minutes before moving on to ensure the adhesive has adequate time to soften. Flip the digitizer panel over and gently push the home button up out of its slot in the front panel.

  • Prepare an iOpener and lay it over the lower edge of the digitizer to loosen the adhesive holding the home button gasket in place.

  • Wait about two minutes before moving on to ensure the adhesive has adequate time to soften.

  • Flip the digitizer panel over and gently push the home button up out of its slot in the front panel.

  • Push slowly and apply just enough pressure to slowly separate the gasket from the glass—if you push too hard the gasket will rip.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下，你的投稿已被许可。