跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
日语

正翻译步骤 1

步骤 1
The capacitor can store electricity even when the camera is off! Do not touch it until you have safely discharged it. Connect the two capacitor wires briefly with a pair of metal tweezers to discharge the capacitor.  You may see a small spark. Remove eight screws using a Phillips #00 screwdriver.
  • The capacitor can store electricity even when the camera is off! Do not touch it until you have safely discharged it.

  • Connect the two capacitor wires briefly with a pair of metal tweezers to discharge the capacitor. You may see a small spark.

  • Remove eight screws using a Phillips #00 screwdriver.

  • Two (4.31 mm) screws are in the front of the camera.

  • Two (3.30 mm) screws are located in the bottom of the camera.

  • This causes the tripod mount on the bottom to become loose.

  • Four (3 x 3.33 mm and 1 x 4.34 mm) screws are in the back of the camera.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可