跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的6指南

英语
中文

正翻译步骤 2

步骤 2
Using a Phillips #00 screwdriver, remove seven screws located on the outside case of the camera. One (6.25 mm) screw is located on the top right corner, right to the "OK" button. Four (4.45 mm) screws are on the bottom of the camera.
  • Using a Phillips #00 screwdriver, remove seven screws located on the outside case of the camera.

  • One (6.25 mm) screw is located on the top right corner, right to the "OK" button.

  • Four (4.45 mm) screws are on the bottom of the camera.

  • Two (2.95 mm) screws are on the left side of the camera, above the USB port.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可