注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的6指南。
正翻译步骤 2
步骤 2


-
Using a Phillips #00 screwdriver, remove seven screws located throughout the camera.
-
One (6.25 mm) screw is located on the top right corner, right to the "OK" button.
-
Four (4.45 mm) screws are on the bottom of the camera.
-
Two (2.95 mm) screws are on the left side of the camera, above the USB Port.