Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 2

Step 2
Squeeze the heat sink thermal sensor cable between your thumb and the tip of a spudger.
  • Squeeze the heat sink thermal sensor cable between your thumb and the tip of a spudger.

  • Lift the spudger upward to lift the thermal sensor connector out of its socket on the logic board.

  • The early 2011 model may not have a thermal sensor connector.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可