跳转到主内容
英语
中文

正翻译步骤 4

步骤 4
Remove the four T10 Torx screws. Slide the cover towards the back of the enclosure and remove.  There is a small dot of lock-tite on each screw, fyi. The third image is unnecessary, but if you quickly mouse over the second and third images it kinda makes it look animated.
  • Remove the four T10 Torx screws.

  • Slide the cover towards the back of the enclosure and remove. There is a small dot of lock-tite on each screw, fyi.

  • The third image is unnecessary, but if you quickly mouse over the second and third images it kinda makes it look animated.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可