注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的7指南。
-
Use the flat end of a spudger to lift the right fan connector out of its socket on the logic board.
-
It is useful to twist the spudger axially from beneath the fan cable wires to release the connector.
-
The fan socket and the fan connector can be seen in the second and third pictures. Be careful not to break the plastic fan socket off the logic board as you use your spudger to lift the fan connector straight up and out of its socket. The layout of the logic board shown in the second picture may look slightly different than your machine but the fan socket is the same.
您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)的著作权利。
指南步骤编辑键盘快捷键:
Ctrl + Shift + N
在下面插入新的一行
Ctrl + Shift + P
在上面插入新的一行
查看所有快捷键