跳转到主内容

Reemplazo de la placa del escudo LCD de una iPad Mini 3 Wi-Fi

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的48指南

英语
西班牙语

正翻译步骤 29

步骤 29
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 步骤 0 中的图像 1,2 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 步骤 0 中的图像 2,2
  • Do not attempt to fully remove the LCD. It is still adhered in place and connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end.

  • Insert the flat end of a spudger under the LCD between it and the LCD shield plate and lift gently.

  • Be very careful not to get the spudger under the shield plate. It must be between the LCD and the shield.

  • Even bending the LCD slightly can permanently damage it, so be extremely careful as you lift.

  • You can try these alternate removal methods to reduce your chance of cracking the LCD during the removal process:

  • Run a thin string (like floss or fishing line) under the display, starting from the top then working your way down

  • Use a thin, flexible card or plastic money note to cut through the adhesive starting from the top.

No trates de remover completamente el LCD. Aún está sujeto a su lugar y conectado al iPad por varios cables al final del botón de inicio. Levanta solo del final de la cámara frontal.

Inserta la punta plana de un spudger debajo del LCD, entre este y la placa protectora del LCD y levante gentilmente.

Ten cuidado de no colocar el spudger debajo de la placa protectora. Debe ser entre el LCD y la placa.

Incluso doblando el LCD un poco puede permanentemente dañarlo, por lo tanto ten extremo cuidado cuando lo levantes.

Puedes probar estos métodos alternativos para remover para reducir las chances de romper el LCD cuando lo estés removiendo.

Corre una cuerda delgada (como hilo dental o hilo de pesca) bajo la pantalla, comenzando desde la parte superior y luego trabajando hacia abajo

Usa una delgada, tarjeta flexible o dinero en plástico para cortar a través del adhesivo empezando desde arriba.

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利