跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的48指南

英语
中文

正翻译步骤 20

步骤 20
Slide the lower left pick to the lower left corner to cut the adhesive on that corner. Leave the pick at the corner. Do not pry any farther, and do not remove the pick from the iPad. There are quite a few things to avoid beneath the lower bezel, so study the third image closely:
  • Slide the lower left pick to the lower left corner to cut the adhesive on that corner.

  • Leave the pick at the corner. Do not pry any farther, and do not remove the pick from the iPad.

  • There are quite a few things to avoid beneath the lower bezel, so study the third image closely:

  • Antennas

  • Home button cavity

  • Digitizer cable

  • The following steps will direct you where to pry to avoid damage to these components. Only apply heat and pry where directed.

滑动左下边的撬片来分边角处的离粘合剂。

滑动到左下角时停止滑动。 然后放置在此。

在下面板下面有很多东西需要规避,请仔细研究第三张图像:

天线

Home键

排线

接下来的步骤将会指导您如何避免伤害这些部件。 只加热和撬动指南所指示的部位。

在开源创作共享许可协议下,你的投稿已被许可