跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
意大利语

正翻译步骤 4

步骤 4
Grip the ribbon connector with your thumb and forefinger. Pull down gently until the connector, not the ribbon itself, comes out of its socket.
  • Grip the ribbon connector with your thumb and forefinger. Pull down gently until the connector, not the ribbon itself, comes out of its socket.

  • Separate the front and back casings.

Afferra il connettore a nastro con il pollice e l'indice. Tira delicatamente verso il basso fino a quando il connettore, non il nastro stesso, non esce dalla presa.

Separa l'involucro anteriore e posteriore.

在开源创作共享许可协议下,你的投稿已被许可