跳转到主内容
英语
中文

正翻译步骤 4

步骤 4
On the right side connection are made via a small printed circuit board. Remove 2 screws in order to remove this for re-soldering or replacement of any of the wires. On replacing this circuit board, take care to ensure that it's both the right way round and the right way up
  • On the right side connection are made via a small printed circuit board. Remove 2 screws in order to remove this for re-soldering or replacement of any of the wires.

  • On replacing this circuit board, take care to ensure that it's both the right way round and the right way up

  • If you are replacing the main lead with the jack plug on the end, make sure that you have suitable strain relief to prevent the lead pulling on the soldered connections.

  • The wire colours are:

  • Right: Red

  • Left: Green

  • Common (Ground): Gold.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可