翻译步骤＃1 - Motorola Moto G 1st Generation Battery Replacement - iFixit

修复你的物品

维修的权力

商店

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。

英语

中文

下一步

正翻译步骤 1

步骤 1

Before you start following any of the steps of this guide, completely turn the device off.

Take the plastic back cover off by either using a plastic Pry tool or simply using your hands. Start from the bottom by the charging port

Remove any installed SIM card and memory microSD cards.

Rear Panel

Before you start following any of the steps of this guide, completely turn the device off.
Take the plastic back cover off by either using a plastic Pry tool or simply using your hands. Start from the bottom by the charging port
Remove any installed SIM card and memory microSD cards.
Push the SIM card into the phone, and the spring eject mechanism should release the card.
The microSD memory card(s) may not have an eject mechanism. If so, they must be removed carefully by pushing on the raised edge/bump that is built onto the card. Use your fingernail or a plastic or rubber tool, but not one that will scratch and damage the delicate card.
Patience must be taken to prevent irreversible damage and loss of data on the card.

在开源创作共享许可协议下，你的投稿已被许可。