翻译步骤＃1 - iPod Touch 3rd Generation Front Panel Replacement

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南。

英语

中文

下一步

正翻译步骤 1

步骤 1

The glass front panel on the third generation Touch has a plastic frame glued both to its outer edge and also under the wide black strips at the top and bottom of the device.
The picture at left (front panel already removed) shows the locations of the metal clips (shown in red) that snap on to the plastic frame. In the next few steps, try to pry the front panel up from the gaps between these clips.
Also, be mindful of the very thin and delicate touch screen ribbon cable (connector location shown in green) attaching the front panel to the upper left corner of the Touch.

在开源创作共享许可协议下，你的投稿已被许可。