翻译步骤＃2 - iPod Touch 3rd Generation Display Replacement

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的4指南。

英语

中文

正翻译步骤 2

步骤 2

Lift the display up from its lower edge and rotate it toward the top of the Touch.
The next few steps require removal of components under where the display normally sits. Be sure to hold the display to avoid putting tension on the delicate display ribbon cable.
Remove the seven Phillips screws securing the metal display tray to the rear panel. They may be very tight; watch carefully to make sure you don't strip them.
The two darker screws belong in the two holes in the tray nearest the bottom edge of the Touch.

在开源创作共享许可协议下，你的投稿已被许可。