跳转到主内容
英语
中文

正翻译步骤 3

步骤 3
Using a plastic opening tool, release the latch (it swings up towards the cable) and slide the digitizer connector free.
Disconnect and Remove the Digitizer Connector
  • Using a plastic opening tool, release the latch (it swings up towards the cable) and slide the digitizer connector free.

  • On the wide area of the cable (where the chip is), the cable is strongly glued to a small metal plate which is in turn strongly affixed to the back with heat-conducting adhesive. Loosen this cable from the back.

  • If you plan on reusing the digitizer be very careful when removing this as you can easily damage the cable. Use gentle applications of heat and a metal tool to pry between the metal plate and the back.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可