跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 2

步骤 2
Remove the heat sink from the logic board. If the heat sink appears to be stuck to the logic board after removing all screws, it may be helpful to use a spudger to separate the two components. Don't reassemble your Mac mini without applying a new layer of thermal paste.We have a thermal paste guide to show you how.
  • Remove the heat sink from the logic board.

  • If the heat sink appears to be stuck to the logic board after removing all screws, it may be helpful to use a spudger to separate the two components.

  • Don't reassemble your Mac mini without applying a new layer of thermal paste.We have a thermal paste guide to show you how.

移除逻辑板散热器。

除去所有螺钉之后,如果散热器似乎粘在逻辑板上,使用撬棒可能有助于两个组件分开。

在开源创作共享许可协议下,你的投稿已被许可