跳转到主内容

修复你的物品

维修的权力

配件 & 工具

英语
中文

正翻译步骤 4

步骤 4
Remove the screws in the three red circles. Two of the three ribbon cables in the turquoise box will need to be removed like those above the battery. Use the pointed edge spudger to pull the third cable out to the left. Insert the spudger on top the ribbon cable but below the circuit board in the yellow circle, and pry that ribbon cable free. Remove the headphone jack as see in the picture. Use tweezers to disconnect the wire connector in the red box. As seen in the picture gentle insert the plastic opening tool and unhook that cable and begin to lift the circuit board.
Removing Extra Components
  • Remove the screws in the three red circles. Two of the three ribbon cables in the turquoise box will need to be removed like those above the battery. Use the pointed edge spudger to pull the third cable out to the left.

  • Insert the spudger on top the ribbon cable but below the circuit board in the yellow circle, and pry that ribbon cable free. Remove the headphone jack as see in the picture.

  • Use tweezers to disconnect the wire connector in the red box. As seen in the picture gentle insert the plastic opening tool and unhook that cable and begin to lift the circuit board.

取下三个红色圆圈中的螺丝。 绿松石盒中的三根丝带电缆中的两根将需要像电池上方那样去除。 使用尖边喷嘴将第三根电线拉出左侧。

将喷嘴插入带状电缆的顶部,但在黄色圆圈的电路板下面,并撬开该带状电线。 取下耳机插孔,如图所示。

使用镊子断开红色框中的电线连接器。 如图所示,轻轻地插入塑料打开工具并取下该电线,并开始提起主板。

在开源创作共享许可协议下,你的投稿已被许可