跳转到主内容
英语
中文

正翻译步骤 2

步骤 2
While holding the plastic retainer down against the board, use the tip of a spudger to pry the PRAM battery out of its housing.
  • While holding the plastic retainer down against the board, use the tip of a spudger to pry the PRAM battery out of its housing.

  • Failure to hold the plastic retainer down during the prying process may result in it tearing off the motherboard.

  • Before installing the heat sink onto the motherboard, it is essential to apply a new layer of thermal paste. This guide will show you how to do it.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可