跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 3

步骤 3
When handling the hard drive hold it by the sled or sides be sure not to touch the green circuit board visible in all 3 pictures. Locate the four 6-32 type screws on the Hard Drive sled. Using a Phillips head screw driver remove the four screws and separate the metal sled from the Hard Drive
Remove metal Hard Drive sled
  • When handling the hard drive hold it by the sled or sides be sure not to touch the green circuit board visible in all 3 pictures.

  • Locate the four 6-32 type screws on the Hard Drive sled.

  • Using a Phillips head screw driver remove the four screws and separate the metal sled from the Hard Drive

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可