跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的10本指南

英语
中文

正翻译步骤 6

步骤 6
Insert the flat edge of a metal spudger between the left and right cases where the warranty sticker used to be. Pry the left case upwards to form a gap between the two cases, and slide the spudger in toward the left case. Rotate the spudger upward to release the last clip.
  • Insert the flat edge of a metal spudger between the left and right cases where the warranty sticker used to be.

  • Pry the left case upwards to form a gap between the two cases, and slide the spudger in toward the left case.

  • Rotate the spudger upward to release the last clip.

  • The spudgers holding the top and bottom clips apart may be removed.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可