跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的6指南

英语
中文

正翻译步骤 3

步骤 3
Use a metal spudger to pry up the left edge of the upper grey front plate. Place the spudger between the inside white plastic edge and the grey plate. Do not pry between the two white plastic frames. Don’t pry against the glass. Pry against only the left side as there is a delicate antenna under the plate.
Front Plate
  • Use a metal spudger to pry up the left edge of the upper grey front plate.

  • Place the spudger between the inside white plastic edge and the grey plate. Do not pry between the two white plastic frames.

  • Don’t pry against the glass. Pry against only the left side as there is a delicate antenna under the plate.

  • Use the narrow plastic pry tool to carefully separate the black ribbon antenna from the grey plate.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可