跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 10

步骤 10
If it is still stuck to the front panel, remove the strip of EMI tape near the ambient light sensor socket.
  • If it is still stuck to the front panel, remove the strip of EMI tape near the ambient light sensor socket.

  • If necessary, transfer this to your new LCD.

  • If it is attached to the LCD and you are reusing the LCD, skip this step. If you are replacing the LCD as well, transfer the strip of EMI tape to your new LCD.

如果其仍然粘在前面板上,将光线感应器附近的胶条移除。

如有必要,将其贴在新液晶屏上。

如果它附在液晶屏上或者需要再使用液晶屏,跳过这一步。如果正在更换液晶屏,请将其贴在新液晶屏上。。

在开源创作共享许可协议下,你的投稿已被许可