跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
中文

正翻译步骤 2

Step 2
Use the edge of an iPod opening tool to carefully pry the ambient light sensor board off the adhesive securing it to the display frame. Once you've gained enough clearance, peel the ambient light sensor off the LCD. If necessary, attach the plastic view window to your new ambient light sensor before installation.
  • Use the edge of an iPod opening tool to carefully pry the ambient light sensor board off the adhesive securing it to the display frame.

  • Once you've gained enough clearance, peel the ambient light sensor off the LCD.

  • If necessary, attach the plastic view window to your new ambient light sensor before installation.

用塑料撬棒的边缘小心撬起贴在屏幕支架上的光线感应器。

当有足够的缝隙时就把光线感应器从液晶显示屏上分离出来。

必要时,在安装前将塑料固定片安装在新光线感应器上。

在开源创作共享许可协议下,你的投稿已被许可