跳转到主内容
英语
中文

正翻译步骤 4

步骤 4
Use an XACTO Knife to cut on the line you traced. It can be difficult to control the knife when applying enough force to cut through the plastic, so I recommend going lightly for the first couple of times to make a groove.  Once you have a properly-shaped groove, go back and apply more force to cut through the plastic. You can also drill 5 pilot holes using a fine drill bit at the vertices. This also helps to guide the knife. To get a very clean cut you can try heating the tip of the exacto knife with a small lighter torch or even Cigarette Lighter. The hot Exacto blade will easily score into the sim card this way but you may need to heat it several times as it looses heat very quickly.
  • Use an XACTO Knife to cut on the line you traced.

  • It can be difficult to control the knife when applying enough force to cut through the plastic, so I recommend going lightly for the first couple of times to make a groove. Once you have a properly-shaped groove, go back and apply more force to cut through the plastic. You can also drill 5 pilot holes using a fine drill bit at the vertices. This also helps to guide the knife.

  • To get a very clean cut you can try heating the tip of the exacto knife with a small lighter torch or even Cigarette Lighter. The hot Exacto blade will easily score into the sim card this way but you may need to heat it several times as it looses heat very quickly.

  • When you are nearly done, flip the SIM-Card over. You should be able to see the outline of the cutout you made on the top side. For a cleaner result, finish cutting the slot from the bottom side.

  • Remove the piece you cut out of the SIM.

使用XACTO刀来按照您画的线切割。

当施加足够的力来切割塑料时,可能难以控制刀片,所以我建议轻轻地切割几次来形成凹槽。 一旦你有一个正确形状的凹槽,施加更多的力量来切割塑料。 您还可以在顶点使用精细钻头钻出5个导向孔。 这也有助于引刀。

要得到一个很干净的切口,你可以尝试用一个较小的打火机甚至点烟器加热刀的尖端。 热的Exacto刀片很容易以这种方式切入SIM卡,但是您可能需要加热几次,因为热量很快会从刀上散发。

几乎完成后,将SIM卡翻转过来。 你应该可以看到大概的切割轮廓。 为了更干净的切割的效果,请从底部完成切割。

从切口中取出切下来的部分。

在开源创作共享许可协议下,你的投稿已被许可