修复你的物品 社区 商店

iPhone 6 LCD 防护板的更换

注：你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 8

步骤 8
iPhone 6 LCD Shield Plate Replacement: 步骤 0 中的图像 1，3 iPhone 6 LCD Shield Plate Replacement: 步骤 0 中的图像 2，3 iPhone 6 LCD Shield Plate Replacement: 步骤 0 中的图像 3，3

  • Slide the point of a spudger behind the shield plate to gently lift the home button cable up off of the front panel.

  • If the cable doesn't peel away easily, use a little heat from an iOpener or hair dryer to soften the adhesive underneath.

  • Remove the LCD shield plate.

  • During reassembly, make sure to seat the home button connector on the shield behind the small indentation in the plastic.

使用撬棒滑入防护板后面，轻轻地将Home键排线向上拉出前面板。

如果排线不容易被拉起，请使用iOpener或吹风机微微加热来软化下面的粘胶。

移除LCD防护板。

[* black] Slide the point of a spudger behind the shield plate to gently lift the home button cable up off of the front panel.
[* icon_caution] If the cable doesn't peel away easily, use a little heat from an iOpener or hair dryer to soften the adhesive underneath.
[* black] Remove the LCD shield plate.
+[* red] During reassembly, make sure to seat the home button connector on the shield behind the small indentation in the plastic.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。