注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 4

步骤 4
For enough clearance to remove the hard drive, the logic board must be slightly removed. To accomplish this, two cylindrical rods must be inserted into the holes highlighted in red. Inserting instruments into any logic board holes other than the ones highlighted in red may severely damage the logic board. Insert a Mac mini Logic Board Removal Tool into the two holes highlighted in red. Be sure it makes contact with the outer case below the logic board before proceeding.
  • For enough clearance to remove the hard drive, the logic board must be slightly removed. To accomplish this, two cylindrical rods must be inserted into the holes highlighted in red.

  • Inserting instruments into any logic board holes other than the ones highlighted in red may severely damage the logic board.

  • Insert a Mac mini Logic Board Removal Tool into the two holes highlighted in red. Be sure it makes contact with the outer case below the logic board before proceeding.

  • If you don't have a Logic Board Removal Tool handy, you can use two tools having a maximum diameter of 2.5 mm instead. Just insert one into each of the highlighted holes.

  • Carefully pull the tool toward the I/O board. The logic board and I/O board assembly should slightly slide out of the outer case.

  • Cease prying when the I/O board is visibly separated from the outer case. Remove the Mac mini Logic Board Removal tool.

为了拆卸硬盘足够的空间,逻辑板必须稍微拆下。 要做到这一点,必须将两个圆柱形杆插入红色突出的孔中。

将工具插入除红色突出部分以外的任何逻辑板孔可能会严重损坏逻辑板。

将Mac Mini逻辑板拆卸工具插入红色突出显示的两个孔中。 在继续之前,确保它与逻辑板下面的外壳接触。

如果您没有方便的逻辑板拆卸工具,则可以使用两个最大直径为2.5毫米的工具。 只需在每个突出的孔中插入一个。

小心地将工具拉向I / O板。 逻辑板和I / O板组件应略微滑出外壳。

当I / O板与外壳明显分离时停止撬动。 卸下Mac Mini逻辑板拆卸工具。

[* icon_note] For enough clearance to remove the hard drive, the logic board must be slightly removed. To accomplish this, two cylindrical rods must be inserted into the holes highlighted in red.
[* icon_caution] Inserting instruments into any logic board holes other than the ones highlighted in red may severely damage the logic board.
[* black] Insert a Mac Minimini Logic Board Removal Tool into the two holes highlighted in red. Be sure it makes contact with the outer case below the logic board before proceeding.
[* black] Insert a Mac Minimini Logic Board Removal Tool into the two holes highlighted in red. Be sure it makes contact with the outer case below the logic board before proceeding.
[* icon_note] If you don't have a Logic Board Removal Tool handy, you can use two tools having a maximum diameter of 2.5 mm instead. Just insert one into each of the highlighted holes.
[* black] Carefully pull the tool toward the I/O board. The logic board and I/O board assembly should slightly slide out of the outer case.
[* black] Cease prying when the I/O board is visibly separated from the outer case. Remove the Mac Minimini Logic Board Removal tool.
[* black] Cease prying when the I/O board is visibly separated from the outer case. Remove the Mac Minimini Logic Board Removal tool.

在开源创作共享许可协议下,你的投稿已被许可