跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 4

步骤 4
Carefully un-clip the antenna from the logic board near the PRAM battery. Gently de-route the antenna cable through the hole in the logic board. De-route the antenna cable from the clips on the logic board near the I/O bezel.
  • Carefully un-clip the antenna from the logic board near the PRAM battery.

  • Gently de-route the antenna cable through the hole in the logic board.

  • De-route the antenna cable from the clips on the logic board near the I/O bezel.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可