Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
中文

正翻译步骤 2

Step 2
Disconnect the ribbon cable between the sensor driver board and the motherboard. Remove the 3.0x7.5 mm T9 screw holding the sensor driver board to the heat sink. Remove the infrared sensor board for the Kinect.
  • Disconnect the ribbon cable between the sensor driver board and the motherboard.

  • Remove the 3.0x7.5 mm T9 screw holding the sensor driver board to the heat sink.

  • Remove the infrared sensor board for the Kinect.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可