修复你的物品

维修的权力

商店

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 3

步骤 3
When you feel increased resistance from the adhesive strip, pull it gently around the lower right corner of the battery. Continue pulling the adhesive tab upward and away from the right edge of the battery, allowing it to slowly slide out from between the battery and the rear case, until the strip comes free from the iPhone. Don't allow the adhesive strip to snag on the battery connector, or it may tear or break off.

  • When you feel increased resistance from the adhesive strip, pull it gently around the lower right corner of the battery.

  • Continue pulling the adhesive tab upward and away from the right edge of the battery, allowing it to slowly slide out from between the battery and the rear case, until the strip comes free from the iPhone.

  • Don't allow the adhesive strip to snag on the battery connector, or it may tear or break off.

当你感觉到胶带长度已经被拉到极限时，轻缓地将胶带拉到电池右边底部地方。

在撕的过程，将胶带往上拉，并让胶带慢慢地从电池与后盖间分离。

请勿将胶带黏到电池连接座上，因为这有可能造成断裂或电池损坏。

在开源创作共享许可协议下，你的投稿已被许可。