修复你的物品

维修的权力

商店

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的4本指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 15

步骤 15
Remove the following screws securing the logic board to the rear case:

  • Remove the following screws securing the logic board to the rear case:

  • Two 1.9 mm Phillips screws

  • One 2.3 mm standoff screw

  • Standoff screws are best removed using a standoff screwdriver or bit.

  • In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

拧下以下把主板固定在后机壳上的螺丝：

两个1.9 毫米 十字螺丝

一个2.3 毫米 压铆螺柱螺丝

你可以通过专用的压铆螺柱螺丝刀或螺丝刀组更轻松地卸下它们。

简单来说，一个小的平头螺丝刀可以做到——但是要额外地注意，保证不要损坏周围部件。

[* black] Remove the following screws securing the logic board to the rear case:
[* red] Two 1.9 mm Phillips screws
[* orange] One 2.3 mm standoff screw
[* icon_note] Standoff screws are best removed using an [product|IF145-343|new_window=true] and [product|IF145-326|driver handle|new_window=true]a [product|IF145-388-4|standoff screwdriver|new_window=true] or bit.
[* icon_note] Standoff screws are best removed using an [product|IF145-343|new_window=true] and [product|IF145-326|driver handle|new_window=true]a [product|IF145-388-4|standoff screwdriver|new_window=true] or bit.
[* icon_caution] In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

在开源创作共享许可协议下，你的投稿已被许可。