跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 7

步骤 7
Insert a plastic card under the logic board edge of the battery.
  • Insert a plastic card under the logic board edge of the battery.

  • Be careful to keep the card as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals.

  • Press the card in at several points if necessary to break up the adhesive behind the battery.

在主板与电池间的缝隙插入塑胶卡。

在插入塑胶卡的过程中,请特别留意,尽量保持塑胶卡平整,避免造成电池变形,因为若电池遭到破坏的话,会有造成化学物质外泄的可能。

试着从不同的点插入,以分离电池后面的粘合剂。

在开源创作共享许可协议下,你的投稿已被许可