跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的4本指南

英语
中文

正翻译步骤 16

步骤 16
Use the flat end of a spudger to lift the battery connector end of the logic board up slightly, just enough to grab with your fingers. Insert the spudger near the metal shields below the SIM card tray to avoid damaging any chips or sockets.
  • Use the flat end of a spudger to lift the battery connector end of the logic board up slightly, just enough to grab with your fingers.

  • Insert the spudger near the metal shields below the SIM card tray to avoid damaging any chips or sockets.

用平头撬棒挑起电池供电排线后轻轻撬起主板至可放下手指高度

撬棒请放在SIM卡槽下方的电磁屏蔽罩部分,以防止损坏芯片和接口

在开源创作共享许可协议下,你的投稿已被许可