跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的4本指南

英语
中文

正翻译步骤 14

步骤 14
Use the flat end of a spudger to lift the camera cable connector straight up out of its socket on the logic board. Be sure to only pry on the connector not the socket itself or you can cause permanent damage to the logic board. Fold the camera cable up out of the way of the logic board.
  • Use the flat end of a spudger to lift the camera cable connector straight up out of its socket on the logic board.

  • Be sure to only pry on the connector not the socket itself or you can cause permanent damage to the logic board.

  • Fold the camera cable up out of the way of the logic board.

使用平头撬棒断开摄像头排线。

请确保小心的断开排线,否则可能会对主板造成永久性损伤。

如图翻折摄像头排线。

在开源创作共享许可协议下,你的投稿已被许可