跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的18本指南

英语
中文

正翻译步骤 2

步骤 2
Use a plastic opening tool to gently pry the battery connector up from its socket on the logic board.
  • Use a plastic opening tool to gently pry the battery connector up from its socket on the logic board.

  • Pry from the top and bottom of the connector bracket—there isn't as much of an overhang on the sides, and you may damage the connector.

  • Be very careful to only pry up on the battery connector and not the socket on the logic board. If you pry up on the logic board socket, you may break it entirely.

  • Remove the metal clip covering the antenna connector.

用塑料撬棒将电池排线从主板的电池座上分离出来。

将排线从电池座的底部向上挑起,不要过度拉伸否则将会损坏排线。

注意小心将排线挑起即可不要撬到主板,如果将电池座撬起,将彻底损坏电池座。

取下天线的金属屏蔽盖。

在开源创作共享许可协议下,你的投稿已被许可