注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的18本指南

英语
中文

正翻译步骤 1

步骤 1
Remove the single 2.5 mm Phillips screw securing the battery connector to the logic board.
  • Remove the single 2.5 mm Phillips screw securing the battery connector to the logic board.

  • Some devices may have two screws, one of which holds down the contact pad which is located above the screw indicated in red in the photo.

拧下电池扣屏蔽罩上单个2.5mm的飞利浦螺丝。

有些机器会有2颗螺丝:1颗在垫片下面,另外一颗在图示中的位置。

在开源创作共享许可协议下,你的投稿已被许可