注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的23本指南

英语
中文

正翻译步骤 1

步骤 1
Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured. Power off your iPhone before beginning disassembly.
  • Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

  • Power off your iPhone before beginning disassembly.

  • Your iPhone 4 rear cover may have either two #000 Phillips screws or Apple's 5-Point "Pentalobe" screws (second image). Check which screws you have, and ensure you also have the correct screwdriver in order to remove them.

  • Remove the two 3.6 mm Pentalobe or Phillips #000 screws next to the dock connector.

  • Be sure the driver is well seated when removing Pentalobe screws, they are very easy to strip.

  • During reassembly, we recommend you replace the 5-point screws with equivalent Phillips screws. Our Liberation Kit provides the tools and screws needed to replace the Pentalobe screws with Phillips screws.

在开始之前,将您的iPhone电池放电低于25%。 已充电的锂离子电池如遇意外穿刺,可能会起火和/或爆炸。

在开始拆卸前关闭iPhone的电源。

您的iPhone 4后盖可能有两个#000十字螺丝或苹果的5点“Pentalobe”螺丝(第二张图)。 检查你有哪些螺丝,并确保你也有正确的螺丝刀,以拆下它们。

拆卸两个3.6毫米或000 pentalobe菲利普斯#螺丝旁边的基座连接器。

拆卸Pentalobe螺丝时,确保驱动器安装牢固,非常容易剥离。

在重新组装时,我们建议您用等效的十字螺丝替换5点螺丝。 我们的解决工具包提供了用十字螺丝替换Pentalobe螺丝所需的工具和螺丝。

在开源创作共享许可协议下,你的投稿已被许可