跳转到主内容
英语
中文

正翻译步骤 4

步骤 4
There are 3 more clips underneath. Release these. The side panel is still held by a clip underneath where the control panel was. Press it from under the printer with a flat screwdriver. Ease this section of the side panel forwards, making sure it bends at the front corner, not by the clip, where it is relatively weak.
  • There are 3 more clips underneath. Release these.

  • The side panel is still held by a clip underneath where the control panel was. Press it from under the printer with a flat screwdriver. Ease this section of the side panel forwards, making sure it bends at the front corner, not by the clip, where it is relatively weak.

  • (In the photo you can see the arrows I marked to remind me where to bend it and where not to.)

  • On reassembly, locate this latter clip before offering up the others.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可