跳转到主内容
英语
中文

正翻译步骤 10

步骤 10
Remove 2 screws on the left hand side, securing the print mechanism to the base through the main circuit board. Remove a further screw, visible from the rear of the printer, also passing through the circuit board at a rear corner.
  • Remove 2 screws on the left hand side, securing the print mechanism to the base through the main circuit board.

  • Remove a further screw, visible from the rear of the printer, also passing through the circuit board at a rear corner.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可