跳转到主内容
英语
中文

正翻译步骤 7

步骤 7
Release the rear top cover. This is secured by 5 clips, the middle 3 of which can be released by inserting a flat screwdriver in the holes underneath them. The other 2 can be popped out quite easily. (On reassembly, locate the clips on the top of the printer, then insert the 5 on the back.)
  • Release the rear top cover. This is secured by 5 clips, the middle 3 of which can be released by inserting a flat screwdriver in the holes underneath them. The other 2 can be popped out quite easily.

  • (On reassembly, locate the clips on the top of the printer, then insert the 5 on the back.)

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可