注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南。
正翻译步骤 5
步骤 5

-
Continue to push the logic board assembly through the outer case of the iPod with a spudger.
注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南。
Continue to push the logic board assembly through the outer case of the iPod with a spudger.
Tolerances inside the Nano are extremely tight. Be very patient and go slowly when removing the logic board assembly, and make sure no components or ribbon cables get caught on the case.
To make sure that the hold switch plate does not catch on the housing of the iPod and tear the cable, feed the switch straight down the center of the device, where the opening is the widest.
下一行
上一行
在下面插入新的一行
在上面插入新的一行
缩进当前行
取消缩进当前行
删除当前行
导航到下一步。
导航到上一步。
打开帮助