跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的3本指南

英语
中文

正翻译步骤 4

Step 4
Once the retainer has been pushed past its hole in the outer case, the spudger used to depress it is no longer necessary.
  • Once the retainer has been pushed past its hole in the outer case, the spudger used to depress it is no longer necessary.

  • Using gentle but steady force, push on the top of the LCD to slide the logic board assembly out of the bottom of the iPod.

  • Do not push on the battery, as this may puncture it and cause it to combust.

  • Constantly mind the hold switch plate, making sure it doesn't snag on an edge and tear the ribbon cable.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可