跳转到主内容

修复你的物品

维修的权力

配件 & 工具

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的3本指南

英语
中文

正翻译步骤 1

步骤 1
Use a heat gun to soften the adhesive underneath the camera/microphone cover. Pry the camera/microphone cover off the case with a metal spudger and remove it. It is extremely difficult, if not impossible, to avoid damaging the iPod case near the camera. While this will not affect the iPod's functionality, it will hurt its cosmetic appearance.
  • Use a heat gun to soften the adhesive underneath the camera/microphone cover.

  • Pry the camera/microphone cover off the case with a metal spudger and remove it.

  • It is extremely difficult, if not impossible, to avoid damaging the iPod case near the camera. While this will not affect the iPod's functionality, it will hurt its cosmetic appearance.

  • You can try this alternative method for removing the cover:

  • Use a hot glue gun to apply a bead of glue across the cover.

  • Move the nozzle in the glue for 20 seconds to heat the lens adhesive holding the lens in place.

  • Press a spudger into the hot glue and hold it in place until the glue cools and hardens.

  • Pull on the spudger with firm steady force, while using a fingernail to pry on the cover edge.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可