跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的4本指南

英语
中文

正翻译步骤 1

步骤 1
Use a heat gun to soften the adhesive underneath the plastic bezel at the bottom of the iPod. Use a low heat setting and do not hold the heat gun in place for too long to avoid melting the plastic bezel.
  • Use a heat gun to soften the adhesive underneath the plastic bezel at the bottom of the iPod.

  • Use a low heat setting and do not hold the heat gun in place for too long to avoid melting the plastic bezel.

  • Use a plastic opening tool to pry the bezel from the case of the iPod and remove it.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可