跳转到主内容

修复你的物品

维修的权力

商店

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的3本指南

英语
中文

正翻译步骤 1

步骤 1
Remove the following screws securing the logic board to the rear case:
  • Remove the following screws securing the logic board to the rear case:

  • Two 2.4 mm standoff screws

  • Standoff screws are best removed using a standoff screwdriver or bit.

  • In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

  • One 2.1 mm Phillips #00 screw

拧下以下将主板固定在后壳上的螺丝:

2个 2.4mm 的压铆螺柱螺钉

你可以通过专用的压铆螺柱螺丝刀或螺丝刀组更轻松地卸下它们。

如果手头没有上述工具,也可以用平头螺丝刀来拧,但是要十分小心以避免损伤周围的原件。

一个2.1mm 飞利浦#00螺丝。

[* black] Remove the following screws securing the logic board to the rear case:
[* red] Two 2.4 mm standoff screws
[* icon_note] Standoff screws are best removed using an [product|IF145-343|new_window=true] and [product|IF145-326|driver handle|new_window=true]a [product|IF145-388-4|standoff screwdriver|new_window=true] or bit.
[* icon_note] Standoff screws are best removed using an [product|IF145-343|new_window=true] and [product|IF145-326|driver handle|new_window=true]a [product|IF145-388-4|standoff screwdriver|new_window=true] or bit.
[* icon_caution] In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.
[* orange] One 2.1 mm Phillips #00 screw

在开源创作共享许可协议下,你的投稿已被许可