跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 7

步骤 7
Insert the pointed end of the a spudger between the protective tape and the inverter board. Carefully pull up with the spudger to lift the inverter board out enough to access the connector cables.
  • Insert the pointed end of the a spudger between the protective tape and the inverter board.

  • Carefully pull up with the spudger to lift the inverter board out enough to access the connector cables.

  • Once you can easily grab the board, pull it up enough to gain access to the inverter board's output connector.

  • Gently remove the board in order to avoid damaging any wires or connectors.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可